Microalgal consortium tolerance to bisphenol A and triclosan in wastewater and their effects on growth, biomolecule content and nutrient removal.

Amongst the many treatments available for the removal of emerging contaminants in wastewater, microalgal cultures have been shown to be effective. However, the effectiveness of exposure of a native microalgal consortium to emerging contaminants such as bisphenol-A (BPA) and triclosan (TCS) to determine the half-maximum effective concentrations (EC50) has not yet been determined. The effect on growth and nutrient removal of such a treatment as well as on the production of biomolecules such as carbohydrates, lipids, and proteins are, at present, unknown. In this study, the EC50 of BPA and TCS (96-hour experiments) was determined using a consortium of native microalgae (Scenedesmus obliquus and Desmodesmus sp.) to define the maximum tolerance to these contaminants. The effect of BPA and TCS in synthetic wastewater (SWW) was investigated in terms of microalgal growth, chlorophyll a (Chl-a), carbohydrate, lipid, and protein content, as well as nutrient removal. Assays were performed in heterotrophic conditions (12/12 light/dark cycles). EC50-96 h values of 17 mg/L and 325 µg/L for BPA and TCS, respectively, were found at 72 h. For an initial microalgal inoculum of ≈ 300 mg TSS/L (total suspended solids per litre), growth increased by 16.1% when exposed to BPA and 17.78% for TCS. At ≈ 500 mg TSS/L, growth increased by 8.25% with BPA and 9.92% with TCS, respectively. At the EC50-96 h concentrations determined in the study, BPA and TCS did not limit the growth of microalgae in wastewater. Moreover, they were found to stimulate the content of Chl-a, carbohydrates, lipids, proteins, and enhance nutrient removal. AVAILABILITY OF DATA AND MATERIAL: Data sharing not applicable to this article as no datasets were generated or analysed during the present study.

Bioconversion of cellulose into bisabolene using Ruminococcus flavefaciens and Rhodosporidium toruloides.

In this study, organic acids were demonstrated as a promising carbon source for bisabolene production by the non-conventional yeast, Rhodosporidium toruloides, at microscale with a maximum titre of 1055 ± 7 mg/L. A 125-fold scale-up of the optimal process, enhanced bisabolene titres 2.5-fold to 2606 mg/L. Implementation of a pH controlled organic acid feeding strategy at this scale lead to a further threefold improvement in bisabolene titre to 7758 mg/L, the highest reported microbial titre. Finally, a proof-of-concept sequential bioreactor approach was investigated. Firstly, the cellulolytic bacterium Ruminococcus flavefaciens was employed to ferment cellulose, yielding 4.2 g/L of organic acids. R. toruloides was subsequently cultivated in the resulting supernatant, producing 318 ± 22 mg/L of bisabolene. This highlights the feasibility of a sequential bioprocess for the bioconversion of cellulose, into biojet fuel candidates. Future work will focus on enhancing organic acid yields and the use of real lignocellulosic feedstocks to further enhance bisabolene production.

Bioprospecting of wild type ethanologenic yeast for ethanol fuel production from wastewater-grown microalgae.

BACKGROUND: Wild-type yeasts have been successfully used to obtain food products, yet their full potential as fermenting microorganisms for large-scale ethanol fuel production has to be determined. In this study, wild-type ethanologenic yeasts isolated from a secondary effluent were assessed for their capability to ferment saccharified microalgae sugars. RESULTS: Yeast species in wastewater were identified sequencing the Internal Transcribed Spacers 1 and 2 regions of the ribosomal cluster. Concurrently, microalgae biomass sugars were saccharified via acid hydrolysis, producing 5.0 ± 0.3 g L-1 of fermentable sugars. Glucose consumption and ethanol production of yeasts in hydrolyzed-microalgae liquor were tested at different initial sugar concentrations and fermentation time. The predominant ethanologenic yeast species was identified as Candida sp., and glucose consumption for this strain and S. cerevisiae achieved 75% and 87% of the initial concentration at optimal conditions, respectively. Relatively similar ethanol yields were determined for both species, achieving 0.45 ± 0.05 (S. cerevisiae) and 0.46 ± 0.05 g ethanol per g glucose (Candida sp.). CONCLUSION: Overall, the results provide a first insight of the fermentation capacities of specific wild-type Candida species, and their potential role in ethanol industries seeking to improve their cost-efficiency.

Wastewater-leachate treatment by microalgae: Biomass, carbohydrate and lipid production.

Increases in wastewater discharges and the generation of municipal solid wastes have resulted in deleterious effects on the environment, causing eutrophication and pollution of water bodies. It is therefore necessary to investigate sustainable bioremediation alternatives. Wastewater treatment using consortia of microalgae-bacteria is an attractive alternative because it allows the removal and recycling of nutrients, with the additional advantage of biomass production and its subsequent conversion into valuable by-products. The present study aims to integrate wastewater and landfill leachate treatment with the production of microalgal biomass, considering not only its valorization in terms of lipid and carbohydrate content but also the effect of nutrient limitation on biomass formation. The effect of treating a mixture of raw wastewater with different leachate ratios (0%, 7%, 10% and 15%) was investigated using a microalgae-bacteria consortium. Two microalgae (Desmodesmus spp. and Scenedesmus obliquus) were used. Nutrient removal, biomass concentration, carbohydrate, lipid and Fatty Acid Methyl Ester (FAMEs) content and morphological changes were evaluated. Removals of 82% of NH4+ and 43% of orthophosphate from a wastewater-leachate mixture (containing 167 mg/L NH4+ and 23 mg/L PO43-) were achieved. The highest final yield was obtained using Desmodesmus spp. (1.95 ±â€¯0.3 g/L). The microalgae were observed to accumulate high lipid (20%) and carbohydrate (41%) contents under nutrient limiting conditions. The concentration of Polyunsaturated Fatty Acids (PUFAs) also increased. Morphological changes including the disintegration of coenobia were observed. By using a mixture of wastewater-leachate it is possible to remove nutrients, since microalgae tolerate high ammonia concentrations, and simultaneously increase the algal biomass concentration containing precursors to allow biofuel production.

Comparison between coagulation-flocculation and ozone-flotation for Scenedesmus microalgal biomolecule recovery and nutrient removal from wastewater in a high-rate algal pond.

The removal of nutrients by Scenedesmus sp. in a high-rate algal pond, and subsequent algal separation by coagulation-flocculation or flotation with ozone to recover biomolecules, were evaluated. Cultivation of Scenedesmus sp. in wastewater resulted in complete NH3-H removal, plus 93% total nitrogen and 61% orthophosphate removals. Ozone-flotation obtained better water quality results than coagulation-flocculation for most parameters (NH3-N, NTK, nitrate and nitrite) except orthophosphate. Ozone-flotation, also produced the highest recovery of lipids, carbohydrates and proteins which were 0.32 ±â€¯0.03, 0.33 ±â€¯0.025 and 0.58 ±â€¯0.014 mg/mg of biomass, respectively. In contrast, there was a low lipid extraction of 0.21 mg of lipids/mg of biomass and 0.12-0.23 mg of protein/mg of biomass in the coagulation-flocculation process. In terms of biomolecule recovery and water quality, ozone showed better results than coagulation-flocculation.

Microbial Electrosynthesis and Anaerobic Fermentation: An Economic Evaluation for Acetic Acid Production from CO2 and CO.

Microbial electrosynthesis (MES) and anaerobic fermentation (AF) are two biological processes capable of reducing CO2, CO, and water into acetic acid, an essential industrial reagent. In this study, we evaluated investment and production costs of acetic acid via MES and AF, and compared them to industrial chemical processes: methanol carbonylation and ethane direct oxidation. Production and investment costs were found high-priced for MES (1.44 £/kg, 1770 £/t) and AF (4.14 £/kg, 1598 £/t) because of variable and fixed costs and low production yields (100 t/y) compared to methanol carbonylation (0.26 £/kg, 261 £/t) and ethane direct oxidation (0.11 £/kg, 258 £/t). However, integrating AF with MES would reduce the release of CO2, double production rates (200 t/y), and decrease investment costs by 9% (1366 £/t). This resulted into setting the production costs at 0.24 £/kg which is currently market competitive (0.48 £/kg). This economically feasible bioprocess produced molar flow rates of 4550 mol per day from MES and AF independently. Our findings offer a bright opportunity toward the use and scale-up of MES and AF for an economically viable acetic acid production process.

Biodiesel production from indigenous microalgae grown in wastewater.

This paper describes a process for producing biodiesel sustainably from microalgae grown in wastewater, whilst significantly reducing the wastewater's nutrients and total coliform. Furthermore, ozone-flotation harvesting of the resultant biomass was investigated, shown to be viable, and resulted in FAMEs of greater oxidation stability. Desmodesmus sp. and two mixed cultures were successfully grown on wastewater. Desmodesmus sp. grew rapidly, to a higher maximum biomass concentration of 0.58 g/L. A native mixed culture dominated by Oscillatoria and Arthrospira, reached 0.45 g/L and exhibited the highest lipid and FAME yield. The FAME obtained from ozone-flotation exhibited the greatest oxidative stability, as the degree of saturation was high. In principle ozone could therefore be used as a combined method of harvesting and reducing FAME unsaturation. During microalgae treatment, the total nitrogen in wastewater was reduced by 55.4-83.9%. More importantly, total coliform removal was as high as 99.8%.

Alternatives for energy production in aerobic wastewater treatment facilities.

Using technologies such as anaerobic digestion for energy generation from wastewater demands a change in infrastructure that several treatment works are not prepared to immediately implement. This works explores the use of energy production technologies to increase the sustainability of conventional aerobic wastewater treatment plants. The first option considered sludge (a by-product from wastewater treatment) as raw material for biodiesel production as Fatty Acid Methyl Esters (FAME). The second option consisted of the addition of microalgae during aerobic wastewater treatment and subsequent harvesting of combined microalgae-sludge to produce biodiesel. Results showed that microalgae were able to grow in aerobic wastewater treatment reactors, reaching maximum growth after 6 days. The use of microalgae did not statistically affect chemical oxygen demand removal but provided benefits on ammonia removal (100% removal vs 68 ± 9% when microalgae were not added). Activated sludge contained fewer lipids (13 ± 3%, by dry weight) than the microalgae-sludge mixture (20.8 ± 4.5%). Hence, FAME production when using microalgae-sludge was higher (51.12 ± 12 mg of FAME/g of dry microalgae-sludge) than when using activated sludge (25.6 ± 7 mg of FAME/g of dry activated sludge). This work showed that producing biodiesel from microalgae grown in conjunction with bacteria during aerobic wastewater treatment can reduce energy use and carbon emissions produced by 18.6 and 26.5%, respectively.

Evaluation of hydrolysis and fermentation rates in microbial fuel cells.

This study determined the influence of substrate degradation on power generation in microbial fuel cells (MFCs) and microbial community selection on the anode. Air cathode MFCs were fed synthetic medium containing different substrates (acetate, glucose and starch) using primary clarifier sewage as source of electroactive bacteria. The complexity of the substrate affected the MFC performance both for power generation and COD removal. Power output decreased with an increase in substrate complexity from 99±2 mWm(-2) for acetate to 4±2 mWm(-2) for starch. The organic matter removal and coulombic efficiency (CE) of MFCs with acetate and glucose (82% of COD removal and 26% CE) were greater than MFCs using starch (60% of COD removal and 19% of CE). The combined hydrolysis-fermentation rate obtained (0.0024 h(-1)) was considerably lower than the fermentation rate (0.018 h(-1)), indicating that hydrolysis of complex compounds limits current output over fermentation. Statistical analysis of microbial community fingerprints, developed on the anode, showed that microbial communities were enriched according to the type of substrate used. Microbial communities producing high power outputs (fed acetate) clustered separately from bacterial communities producing low power outputs (fed complex compounds).

The effect of flavin electron shuttles in microbial fuel cells current production.

The effect of electron shuttles on electron transfer to microbial fuel cell (MFC) anodes was studied in systems where direct contact with the anode was precluded. MFCs were inoculated with Shewanella cells, and flavins used as the electron shuttling compound. In MFCs with no added electron shuttles, flavin concentrations monitored in the MFCs' bulk liquid increased continuously with FMN as the predominant flavin. The maximum concentrations were 0.6 microM for flavin mononucleotide and 0.2 microM for riboflavin. In MFCs with added flavins, micro-molar concentrations were shown to increase current and power output. The peak current was at least four times higher in MFCs with high concentrations of flavins (4.5-5.5 microM) than in MFCs with low concentrations (0.2-0.6 microM). Although high power outputs (around 150 mW/m(2)) were achieved in MFCs with high concentrations of flavins, a Clostridium-like bacterium along with other reactor limitations affected overall coulombic efficiencies (CE) obtained, achieving a maximum CE of 13%. Electron shuttle compounds (flavins) permitted bacteria to utilise a remote electron acceptor (anode) that was not accessible to the cells allowing current production until the electron donor (lactate) was consumed.

A single chamber packed bed microbial fuel cell biosensor for measuring organic content of wastewater.

This study reports an investigation of the effect of the anode surface area on the performance of a single chamber microbial fuel cell (SCMFC) based biosensor for measuring the organic content of wastewater. A packed bed of graphite granules was used as the anode. The surface area of the anode was changed by altering the granule bed thickness (0.3 cm and 1 cm). The anode surface area was found to play a role in the dynamic response of the system. For a granule bed thickness of 1 cm and with an external resistance of 500 Omega, the response time (defined as the time required to achieve 95% of the steady-state current) was reduced by approximately 65% in comparison to a SCMFC biosensor with a carbon cloth anode.

Energy from algae using microbial fuel cells.

Bioelectricity production from a phytoplankton, Chlorella vulgaris, and a macrophyte, Ulva lactuca was examined in single chamber microbial fuel cells (MFCs). MFCs were fed with the two algae (as powders), obtaining differences in energy recovery, degradation efficiency, and power densities. C. vulgaris produced more energy generation per substrate mass (2.5 kWh/kg), but U. lactuca was degraded more completely over a batch cycle (73 +/- 1% COD). Maximum power densities obtained using either single cycle or multiple cycle methods were 0.98 W/m(2) (277 W/m(3)) using C. vulgaris, and 0.76 W/m(2) (215 W/m(3)) using U. lactuca. Polarization curves obtained using a common method of linear sweep voltammetry (LSV) overestimated maximum power densities at a scan rate of 1 mV/s. At 0.1 mV/s, however, the LSV polarization data was in better agreement with single- and multiple-cycle polarization curves. The fingerprints of microbial communities developed in reactors had only 11% similarity to inocula and clustered according to the type of bioprocess used. These results demonstrate that algae can in principle, be used as a renewable source of electricity production in MFCs.